ON THIS PAGE SPECS DESIGN RULES EDGE QUALITY

Home / Services / Laser cutting

Service · Fiber laser

Laser cutting, true to ±0.1 mm.

Fiber laser on a 3,000 × 1,500 mm bed — mild steel to 20 mm, stainless to 12, aluminium to 10. Automatic nesting keeps your material yield high and your unit price low.

Send a DXF for a price Design rules

DXF · DWG · STEP · AI · PDF — quoted straight from geometry

3,000 × 1,500 Max sheet size, mm

≤ 20 mm Mild steel thickness

±0.05 mm Positioning accuracy / m

0.15 mm Typical kerf

Material, gas, edge

Gas choice decides the edge you get. Oxygen cuts thick steel fast with a light oxide film; nitrogen costs more and leaves stainless and aluminium clean enough to weld straight away.

MaterialMax tGasEdge as-cut

Mild steel 20 mm O₂ / N₂ Light oxide (O₂), paint-ready with N₂

Stainless 304 / 316 12 mm N₂ Bright, oxide-free, weldable

Aluminium 5052 / 6061 10 mm N₂ Clean, slight striation on thick plate

Copper 6 mm N₂ / O₂ Clean; reflective — we handle setup

Brass 6 mm N₂ Clean, decorative-grade

Machine & tolerances

Bed size 3,000 × 1,500 mm

Part tolerance, typical ±0.1 mm

Positioning accuracy ±0.05 mm / m

Kerf width 0.1 – 0.3 mm

Min feature, thin gauge 0.5 mm

Files accepted DXF ·DWG ·STEP ·AI ·PDF

Kerf is compensated in CAM — holes and slots come out at drawn size, not drawn-minus-kerf.

By the hundred, or one of a kind

Parts nest tight into full sheets and run by the hundred — or send something no one has cut before: mandalas, Voronoi lattices, layered relief. If you can draw it, the laser can cut it. Swipe the gallery.

Draw it cuttable

Three rules cover 90% of rejected geometry. Break them knowingly and we'll flag it in the DFM notes rather than silently "fixing" your part.

DFM-01 · SHEET-METAL DESIGN RULES

t = MATERIAL THICKNESS

PASS FAIL

1 Ø ≥ 1×t

Holes ≥ material thickness

Below 1×t the beam wanders and holes taper. Need a smaller hole? We pierce a pilot and you drill to final size.

2 EDGE ≥ 1×t

Keep features off the edge

Holes closer than 1×t to an edge (or 2×t to each other) overheat and blow out — the web between melts.

3 R ≥ 0.2 mm

Radius inner corners

A truly sharp inner corner doesn't exist — the beam has width. Draw R0.2+ and the corner comes out as designed.

Also free with cutting: etched part numbers and bend marks, so assemblies arrive self-explanatory. Just put them on a separate layer in your DXF.

What leaves the machine

Clean, weld-ready flat parts across electrical, automotive, signage, decorative, industrial, food-grade, HVAC and architectural work. Filter by industry, hover for the part, click any for full size.

Dross-free underside on steel to 12 mm and stainless to 8 mm — no grinding before welding.

Deburred on request — edges broken by hand or through the deburring machine for handled parts.

Film-protected stainless stays filmed through cutting — brushed and mirror faces arrive unscratched.

Flat parts, guaranteed — we cut from levelled stock and re-level anything that moves on release.