ON THIS PAGE PROFILES CUT FEATURES GALLERY

Home / Services / Tube laser cutting

Tube laser · Cut weld-ready

Stainless tube laser cutting in Bình Dương

Rotary fiber laser for round, square and rectangular tube from Ø 15 to Ø 114 mm and up to 6 m long — copes, miters, slots and holes cut straight from your 3D model. No layout, no drilling jigs, no hand-fitting.

Send a 3D model for a price Cut features

STEP · IGES · SAT · 3D DXF — quoted straight from the solid model

Ø 15–114 Round tube, mm

□ ≤ 80 Square tube, mm

6,000 Max length, mm

±0.15 mm Cut-position accuracy

Profiles, sizes, wall

A rotary chuck spins the stock while the head cuts on every face — round, square or rectangular, Ø 15 to 114 mm and up to 6 m in one length. A semi-automatic loader keeps a run moving.

ProfileSize rangeMax wallTypical use

Round Ø 15 – 114 mm 4 mm Frames, handrails, roll cages

Square □ 15 – 80 mm 4 mm Furniture, machine frames

Rectangular ▭ ≤ 100 × 50 mm 4 mm Beams, chassis rails

Flat / angle On request 4 mm Brackets, gussets, cleats

Machine & tolerances

Chuck capacity Ø 15 – 114 mm

Max tube length 6,000 mm

Cut-position tolerance ±0.15 mm

Min hole diameter 3 mm

Kerf width 0.1 – 0.3 mm

Files accepted STEP ·IGES ·SAT ·3D DXF

Send the 3D solid, not a flat pattern — we unroll and nest it, so holes land true on the curved face.

By the hundred, or one of a kind

Bundle-loaded stock runs a full batch overnight — every part identical, sorted and banded ready to weld. Or send something no one has cut before: lattices, filigree, living hinges. If you can draw it, the laser can cut it. Swipe the gallery.

More than holes in a tube

Everything a tube joint needs, cut from the 3D model in one setup — so parts leave the machine ready to weld, not ready for the drill press and the mitre saw.

TL-01 · WHAT THE TUBE LASER CUTS

1 ANY ANGLE

Copes & fishmouths

Saddle joints cut to the mating tube so frames drop together and tack straight up — no grinding to fit.

2 ANY FACE

Slots & holes

Through-holes, single-wall pierces and slots on every face, all located from one datum — not a marked-out guess.

3 NO SAW

Miters & end profiles

Angled ends and shaped profiles cut in the same pass — no second op on the cold saw, no burr to dress.

4 SELF-JIG

Tab-and-slot

Interlocking tabs so weldments self-locate and hold square on the bench without a fixture.

Also free with cutting: laser-etched part numbers and weld-locating marks, so a bundle of tubes assembles in order without a drawing on the bench.

What comes off the tube laser

Single functional parts, cut weld-ready — automotive, railing, industrial and more. Open any photo full size and zoom in.

Weld-ready copes — mating parts drop together and tack straight up, no grinding to fit.

Burr-free holes — single-wall pierce leaves no back-wall spatter or slag inside the tube.

Dead-square lengths — cut, not sawn, so length holds ±0.15 mm across the whole bundle.

Marked for assembly — etched part numbers and joint labels so a kit welds up in order.

Products made with this process

Made in our shop to your size.

Construction Spiral staircases Kit stairs made to your floor height, priced per step. View product →

Frequently asked questions

Still stuck on a detail?

Send the drawing with your question — fastest way to a real answer.

+84 948 684 939 lienhe@tuanthinh.net

Ask an engineer

Replies within one business day

01 What tube sizes can you laser cut?

Round tube from Ø15 to Ø114 mm, square tube from 15 to 80 mm and rectangular tube up to 100 × 50 mm, with walls up to 4 mm and lengths up to 6 m.

02 What cuts can you make on a tube?

Saddle cuts, mitred ends, slots, holes on every face and self-locating tabs, all in one setup. The smallest hole is 3 mm.

03 What files do you need for tube cutting?

A 3D model as STEP, IGES, SAT or 3D DXF, with no need to unfold it. We unfold and nest it ourselves, so holes land in the right place on the curved face. Quotes within 24 hours.

04 How accurate is tube laser cutting?

Cut positions hold ±0.15 mm. Tubes are cut by laser, not sawn, so ends come out square and lengths stay true across the whole bundle.

05 Are the parts ready to weld straight off the machine?

Yes. Saddle-cut ends fit tight and can be tack welded without grinding, and the laser cuts through one wall only, so no dross lands inside the tube. Part numbers and weld marks are etched free, so the set goes together in the right order.

06 Do you take small quantities?

Yes, from one part to full batches. The semi-automatic loader runs a whole bundle without stopping, and every part comes out identical and bundled for welding.

07 Can you also bend, weld and coat the frame?

Yes. Cut tubes are bent and TIG or laser welded in the shop. Powder coating is done at a partner plant, all on one order, with delivery nationwide.

From tube to weldment

All services →

Send the model,get the tubes.

Send your 3D model today — price and lead time back within 24 hours, weld-ready parts cut from one length.

Request a quote Call +84 948 684 939